FBG-based temperature sensors OSCT series (-40 ÷ +150ºС)
Fiber-optic temperature sensors OSCT based on FBG provide reliable long-term measurements of gases, liquids and solids up to temperature of 150°C.
Bodies of OSCT-311 and OSCT-313 sensors are made of structural cryogenic austenitic stainless steel 316L, resistant to corrosion in corrosive environments. OSCT-312 sensors are dielectric designed to measure temperature at high voltages, strong electromagnetic fields, etc. (for example, in technological HF or microwave installations). The OSCT-312 sensor body is made of polyamide. The OSCT sensors use a high-temperature silicone or teflon tube for mechanical protection of connecting fibers.
OSCT-311 sensors having flat metal body are designed to measure surface temperature. The OSCT-312 sensors are cylindrically shaped. Both these sensor types can be used as single (end type) or multiple (several sensors in one fiber) configuration. Probe-type OSCT-313 sensor is manufactured in the form of a metal cylindrical tube, which makes it possible to use the sensor in industrial equipment as an easy alternative to standard electrical thermometers.
Design of OSCT sensors can be adapted to the Customer requirements while maintaining their functionality.
The spectral shift of the resonant wavelength of the FBG sensor can be recorded by any FBG interrogator. For this purpose, our company offers a line of interrogators - unified recording modules (URM) - that provide acquisition and processing of spectral information of FBG sensors with subsequent output of the results to the operator.
The FORC-Photonics OSCT sensors have the following advantages:
- spectral multiplexing;
- possibility of remote measurements (no power supply requires at the measurement site);
- long-term stability of measurements;
- immunity to electromagnetic interference;
- fire safety;
- small dimensions and weight;
- wide temperature range of measurements;
- low error level within the entire measurement range.
Local and quasi-distributed thermal monitoring of objects, structures and systems in various fields of science and technology:
- buildings, roads, bridges and other constructions;
- hydro, wind, nuclear power stations;
- cars, railway and sea transportation;
- airplanes and space systems;
oil and gas industries, including pipeline monitoring.
- high temperature measurements (up to 10°C);
- high accuracy and long-term stability;
- fast response time;
- ease of installation using standard fittings;
- robust and high-temperature performance of the fiber cables and optical connectors;
- high calibration accuracy and the use of simple calibration equations, allowing measurements using most FBG interrogators.
|OSCT - 311||OSCT - 312||OSCT - 313|
|Operating temperature range, ºС||-40 ÷ +150|
|Absolute accuracy in +25 ÷ +150ºС range, ºС||± 1.5||± 0.25||± 1.5||± 0.25||± 0.25||± 0.5|
|Cable operation temperature range, ºС||-40 ÷ +150||-|
Connector operation temperature range, ºС
||-40 ÷ +80|
|Temperature constant, s||1.5||0.75||24 ÷ 25||0.5||7|
|Temperature sensitivity, ppm/ºС||6.4 ... 8.3||6.5 ... 7.2||4.5 ... 7||4.5 ... 7||7|
|Resonance wavelength, nm||1510 ÷ 1590|
Peak reﬂectivity, %
|FWHM, nm||0.3 ÷ 0.4|
|Fiber type||compatible with SMF-28|
|Connector type (on request)||without connector, FC/APC, LC/APC, SC/APC|
Sensor body size, mm
||20 х 15 х 2.5||20 х 15 х 2||
Ø 6 x 80
|Ø 6 x 60||Ø 1.8 x 1000||Ø 21 x 195|
|Probe diameter, mm||-||-||-||Ø 4|
|Sensor connecting size||hole Ø4||-||-||М20х1.5|
|Probe length (on request), mm||-||-||-||200**|
|Attachment method||screw connection||clip||clip||threaded connection|
|Sensor body material||SS 316L||polyamide||PTFE||SS 316L|
|Optical fiber protection material||steel spiral tube||PTFE||-|
|Cable length, m||1 (both side)||1||1 (both side)||1||1||-|
*- when operating a fiber-optic sensor at temperatures from -40 to +25 ° C, the absolute measurement error may increase
**- at the request of the customer can be changed from 200 to 1000mm
FBG - based temperature sensors OSCT series (-40 ÷ +150C)